6 gauge set with senders km/h mph speedo tacho fuel volt oil pressure temp black
6gauge set+senders include : Speedometer, Tachometer, fuel, volt meter, oil pressure, temp, fuel sending unit, temp sender, oil pressure sender. Bolt in Style Speedometer: Operating voltage: 9-32VDC Operating current:=100mA Operating temperature: -30 +75°C Storage temperature: -40 +85°C Fixing dimension: 85mm(3-3/8 inch) Item weight:325g Tachometer: Indicating range: 0-8000RPM Operation mode: LCD display White Backlight Description: Magnet Movement Gauge Weigh:240g Input ranges: Oil pressure: 10-184ohms, show 0-145 PSI Fuel level: 240-33 ohms, Empty – Full Temp: 287.4-22.4 ohms, show 100-250F Volt: 8-16V Matching Senders: Oil pressure sender: 10-184 ohms, show 0-145 PSI, 1/8″-27 NPT, w/11 psi Fuel level sender: 240-33 ohms, length 6-1/2″ Water temp sender: 287.4-22.4 ohms, 1/8-27 NPT. 6 gauge set with senders km/h mph speedo tacho fuel volt oil pressure temp black. 6 gauge set+senders include : Speedometer, Tachometer, fuel, volt meter, oil pressure, temp, fuel sender, temp sender, oil pressure sender. All the gauges are White Backlight. Operating temperature: -30 +75°C. Storage temperature: -40 +85°C. Fixing dimension: 85mm(3-3/8 inch). Operation mode: LCD display white backlight. Mounting Style of all gauges: Bolt in. KM/H MPH SOG COG ODO TRIP Functions In One. Touch the back button of the meter, we can switch the unit:KNOTS, MPH, KPH and save automatically. SOG:Speed Over Ground. COG:(Course Over Ground):The moving direction relative to the ground position, showing clockwise direction relative to the north. TRIP:Return zero when off electricity. ODO: Accumulated, and never return zero when off electricity. It can be reset to zero if needed. Accessories: Installation Instructions; Wires and resistance. Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration. Protection grade is IP67, the whole body is completely waterproof. 316 Stainless steel bezel with curved glass. Convenient Installation by multi-plug socket connecting way. Do not need any speed sensor, the speed will be automatically calculated by GPS signal. Operation mode: LCD display White Backlight. Description: Magnet Movement Gauge. Touch-sense button to change the setup parameters. Easy setup for pulse/rev. Accept all input signals. You should connect this tachometer to “W”terminal of alternator, speed sender, ECU, hei distributor. It won’t work directly with ignition coil system unless you do something on it. Text me for more details on how to work with coil side. Style: stainless Steel Plate. Item weight of one piece: 130g. Oil pressure: 10-184ohms, show 0-145 PSI. Fuel level: 240-33 ohms, Empty – Full. (If you want a 10-180 ohms or 0-90 ohms input, please leave a message during the check out so we can swap for you). Temp: 287.4-22.4 ohms, show 100-250F. Oil pressure sender: 10-184 ohms, show 0-145 PSI, 1/8-27 NPT, w/11 psi. Fuel level sender: 240-33 ohms, length 6-1/2/165MMSignal and length can be customized, it may charge you extra if you need longer length. Sender’s best length is 0.5-1 inch shorter than the tank. Water temp sender: 287.4-22.4 ohms, 1/8-27 NPT. We are active to resolve any concerns or problems that you may have. If you have any other queries on products and services being offered, just feel free to send a message to me, and I will reply you back as long as I can read it. We are looking for any wholesales or DIY design cooperation. If you have any good idea, please text to me. Temperature Gauge, Tachometer/Rev Counter, Speedometer, Oil Pressure Gauge, Fuel Gauge, Volt Gauge, Sending Units. Digital, Analogue & Digital. Integrated LCD, Illuminated (Backlit). Bar, Degrees Celsius, km/h, psi, rpm, mph, gas.
Comments are closed.