6 Gauge Set With Senders 200KPH Speedo Tacho Fuel Volts Oil Pressure Temp White
Speedometer and tachometer Features This GPS speedometer dial has the function of displaying left and right turn signals and high beam indicators. Application : motorcycle car truck boat Operating voltage: 9-32VDC Fixing dimension: 85mm (Around 3-3/8 Inch) Bezel:SS316L Operation mode: LCD display Red Backlight Indicating range: 0-200KPH Signal:GPS Indicating range: 0-8000RPM Operation mode: 7 colors Backlight Description: Magnet Movement Gauge Minor gauges: Oil pressure: 10-184ohms, show 0-145 PSI Fuel level: 240-33 ohms, Empty – Full Temp: 287.4-22.4 ohms, show 100-250 F Volt: 8-16V Matching Senders: Oil pressure sender: 10-184 ohms, show 0-145 PSI, 1/8″-27 NPT, w/11 psi Fuel level sender: 240-33 ohms, length 6-1/2″ Water temp sender: 287.4-22.4 ohms, 1/8-27 NPT. 6 Gauge Set With Senders 200KPH Speedo Tacho Fuel Volts Oil Pressure Temp White. 6 gauge set+senders include :Speedometer, Tacho, Fuel, Volt meter, Oil pressure, Temp, Fuel sender, Temp sender, Oil pressure sender. Application : motorcycle car truck boat (The mileage is not re-settable, it is like on a car and just keeps adding miles). Fixing dimension: 85mm (Around 3-3/8 Inch). Operation mode: LCD Display. Backlight Color: Red (default)? Totally 7 kinds different backlight color, it will change automatically every 1 minute, or you can fix only one color that you like through press the gauge back “set” button. Hold the MODE button for three seconds for Switch TRIP01 or TRIP02 or COG to display. TRIP 01: (Default): total mileage for one working cycle, data will not be recorded when power off. TRIP 02: total mileage for one working cycle, data will be recorded when power off, However, users could hold the set button for 35 seconds to clear. COG 00 : azomuth instantly indicating, data will not be recorded. Operation mode: LCD display Red Backlight. Description: Magnet Movement Gauge. Touch-sense button to change the setup parameters. Easy setup for pulse/rev. Accept all input signals. You should connect this tachometer to “W”terminal of alternator, speed sender, ECU, hei distributor. It won’t work directly with ignition coil system unless you do something on it. Text me for more details on how to work with coil side. Style: Stainless Steel Plate. Item weight of one piece: 130g. Oil pressure: 10-184ohms, show 0-145 PSI. Fuel level: 240-33 ohms, Empty – Full. (If you want other signals such as 10-180 ohms or 0-90 ohms input, please leave a message during the check out so we can swap for you). Temp: 287.4-22.4 ohms, show 100-250 F. Oil pressure sender: 10-184 ohms, show 0-145 PSI, 1/8-27 NPT, w/11 psi. Fuel level sender: 240-33 ohms, length 6-1/2Signal and length can be customized, it may charge you extra if you need longer length. Sender’s best length is 0.5-1 inch shorter than the tank. Water temp sender: 287.4-22.4 ohms, 1/8-27 NPT. We are active to resolve any concerns or problems that you may have. If you have any other queries on products and services being offered, just feel free to send a message to me, and I will reply you back as long as I can read it. We are looking for any wholesales or DIY design cooperation. If you have any good idea, please text to me.
Comments are closed.