PLEASE DOUBLE CHECK YOUR SIZING AND APPLICATION PRIOR TO ORDERING. New 6 Gauge 316L SS Bezel Set. Set includes 6 gauges: Speedometer, Tachometer, oil pressure, water temp, fuel & volt meter. Speedometer and Tachometer Specs. Auto 4, 6, 8, 10 and 12 cylinder. Marine Gas 2 and 4 cycle. Marine/Auto Diesel input from your Hall effect transducer or alternator W output. Black face, 316L Stainless Steel bezel. 3-3/8 or 86mm mounting Footprint. AMP 8-pin connector wiring. Speedometer – Easy setup with GPS AntennaAccepts all input signals. Blue LED back lighting. 316L Stainless Steel bezel with black face. All gauges except volt meter will work on 12 and 24 volt systems. 2-1/16 or 52mm mounting holes, screw on. Bracket stud type connection. Input ranges:Oil pressure: 240-33 ohms, show 0-100 PSIFuel level: 10-180 ohms, E – F (VDO style)Temp: 240-33-33 ohms, 100-250 FVolt: 10-16 VSender: GPS External Antenna is included. These gauges are Water Resistant, NOT Waterproof. PLEASE NOTE: ANY MODIFICATION, DAMAGE OR DISMEMBERMENT TO ANY PART OR PARTS OF THESE GAUGES WILL BE CONSIDERED NON-REFUNDABLE. The item “6 Gauge set witho senders, Speedo, Tacho, Oil, Temp, Fuel, Volt, BWB” is in sale since Friday, July 16, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Gauges\Gauge Sets & Dash Panels”. The seller is “hovus95″ and is located in Oxford, Pennsylvania. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.
New 6 Gauge 316L SS Bezel. IF USING AN AFTERMARKET UNIT, YOU MAY NEED A TACH ADAPTER. This set is delivered with required signature due to the prices. This is a measure we do to protect from theft. These gauges may require professional installation, as they are not plug and play. The Tachometer needs to be programmed. Please be sure to check the sizes of the gauges vs. What you need for your application and see note at bottom. Set includes 6 gauges: Speedometer, Tachometer, oil pressure, water temp, fuel & volt meter. Sensors/Senders for Oil Psi, Water Temp, Fuel And. Speedometer and Tachometer Specs. Auto 4, 6, 8, 10 and 12 cylinder. Marine Gas 2 and 4 cycle. Marine/Auto Diesel input from your Hall effect transducer or alternator W output. 3-3/8 or 86mm mounting Footprint. AMP 8-pin connector wiring. Speedometer – Easy setup with GPS Antenna. Accepts all input signals. Red LED back lighting. Bezel with black face. All gauges except volt meter will work on 12 and 24 volt systems. 2-1/16 or 52mm mounting holes, screw on. Bracket stud type connection. Oil pressure: 240-33 ohms, show 0-100 PSI. Ohms, E – F (VDO style). 33 ohms, 100-250 F. Oil pressure sender: 0-100psi. Temp sender: 100 – 240F. Fuel level sender, 10-180 ohms. Please note, we also have some 0-90 ohm fuel gauges available. Please message me if you’d like to alter your order for that gauge, instead of the 10-180 ohm fuel gauge. Once these gauges are installed, they may not be returnable. We ask that you double check the sizes of all of the gauges before purchasing to avoid this scenario. The item “6 Gauge set withsenders, Speedo, Tacho, Oil, Temp, Fuel, Volt, BWR” is in sale since Friday, July 2, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Gauges\Gauge Sets & Dash Panels”. The seller is “hovus95″ and is located in Oxford, Pennsylvania. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.
